SEARCH HERE
Skid container CNG filling station
The latest Skid-Mounted Hydraulic CNG Filling Unit is composed of two partsCNGTrailer and Skid-Mounted Hydraulic Pressurized Unit The Unit adopts 30' or 20'standard container body,which has the functions of heatinsulation and noise reduction.
Characterisics of Skid-Mounted Hydraulic CNG Filling Unit
Rapid gas-filling: The Skid-Mounted Hydraulic CNG Filling Unit could fill in NGV (natural gas vehicle) conveniently and rapidly.
After connecting the trailer and the Skid-Mounted Hydraulic CNG Filling Unit with high-pressure pipe, the equipment could fill gas uninterrupted after switch on the power.
Higher integration: At appropriate area, the entire set could be put into operation quicky. Higher automation: Simple operation, safe gas-filling process, stable operation. No manual interference is needed.
Mobility: It takes small area and could be set up wherever the traffic or fire protection regulations allow. It could not only be fixed at public traffc stations, factories. After filling, it can move along with the trailer, no need to construct filling station provide gas to it. After filling gas, it can move along with the trailer, no need to construct filling stations.
Technical Specification
|
No. |
Item |
Content |
|
1 |
Nominal Operating Pressure |
20MPa |
|
2 |
Total Power |
≤52kw、≤95kw |
|
3 |
Capacity |
1000Nm³/h & 2000Nm³/h |
|
4 |
Control Mode |
PCL (Programmable Logic Control) Automatic Control |
|
5 |
Working Cycle |
Continuous |
|
6 |
Oil Loss Under Normal Situation |
Less than 0.1L of oil consumed per 10000 cubic meter gas |
|
7 |
Explosion-Proof Sign | Exdemb[ib]ibⅡAT4 |
|
8 |
Outlet of High-Pressure Gas (Inner Diameter) |
19mm |
|
8 |
Gas Utilization Rate |
≥95% |
| Residual Pressure in Cylinders after Discharging | ≤1MPa | |
|
8 |
Appropriate Ambient Temperature |
-30℃~ +50℃ |
|
8 |
Power of Main Motor |
37Kw 1470rpm; 75Kw 1480rpm; |
|
8 |
Total Power | ≤52Kw & ≤95Kw |
|
8 |
Gross Weight |
8500Kg、9700Kg |
|
8 |
Noise | ≤75dB at 1m away |
|
8 |
Oil Content in CNG |
≤10ppm |
|
8 |
Particie Diameter | ≤5um |
|
9 |
Dimensions (L*W*H) | 6058 * 2438 *2591 ( mm ) |
-
- Economical EG1 pump
- represent the value vs cost.
- It can fully meet all your
- fueling requirements
- with reasonable investment.
- Economical EG1 pump
- represent the value vs cost.L-CNG filling station
-
- Economical EG1 pump
- represent the value vs cost.
- It can fully meet all your
- fueling requirements
- with reasonable investment.
- Economical EG1 pump
- represent the value vs cost.CNG dispenser